© April 2000 website managed by Kristech Services Ltd.

Kristech Services Ltd.

HomeAboutGalleryProductsContactStoneGlassTooling

Stone

Home

COMPACT

EDGE POLISHER FLAT EDGE COMPACT MODEL Complete with:
- Steel structure
- HP 1 variable speed drive motor with speed control
- 6 Head  2 Hp
- 1  3 HP Drip feeder with manual 90° inclination
- 2 upper - lower 2 Hp  bevellers
- Inlet and outlet rollers
- Stainless steel housing
- Siemens / Telemecanique electrical installation
- Pneumatic installation with independent adjustment
- Water installation
- Supports for long pieces with rollers
- Independent and automatic inlet - outlet head
- PVC belt with guide
- Machine to E.C. Standards


TECHNICAL FEATURES

Working thickness : 10/50 mm  (3/8” to 2”)

Working width : 50 mm / 3000 mm  (2” to 118”)
Working length : 300 mm / 3000 mm (12” to 118”)
Belt advance speed : 0.3/3 m/min  (12/118 inch/min)
Width belt: 400 mm  (16”)

Water consumption : 160 L/min  (42 gal/min)
Installed power : 15 KW
Air consumption : 140 L/min  (37 gal/min)


OVERALL DIMENSIONS

Length: 3500 mm  (138”)
Width: 1350 mm     (53”)
Height: 2000 mm     (79”)
Weight: 2850 kg   (6283 lbs.)


ASTER

AUTOMATIC POLISHER FOR STRAIGHT AND BULLNOSE EDGES MODEL ASTER


Comprising:
- Monolithic electro – welded structure that is worked with a machine tool, sand –blasted and painted in accordance with standards ISO 12944-5 S3.17
- Surface for belt shifting that is made of interchangeable stainless steel
- Belt with guide
- Collecting tank for water that is conveyed towards suitable outlets
- Automatic pressure rollers
- Material supporting inlet and outlet beds of rollers
- Supporting bad for projecting pieces
- Pressure regulation independently for each unit
- Electronic control for the working management
- Simple end user friendly graphic user interface by means of 5.7” touchscreen
- Partial working of the edges
- Oledynamics oscillating unit motors
- Automatic central lubrification
- Multicutting 0/90° unit (2800 rev. 4Kw 200-250 mm)
- N. 1 upper bevelling /pre cut unit (2800 rev. 3Kw 130 mm)
- N. 1 lower bevelling /pre cut unit (2800 rev. 3Kw 130 mm)
- N. 1 shaping unit (2400 rev. 130-150 mm)
- N. 5 polishing units (1200 rev. 130-150 mm)


TECHNICAL FEATURES

Working thickness : 10/60 mm   (3/8” to 2-3/8”)
Working width : 180/2000 mm    (7” / 79”)

Working length : 300 mm / 3000 mm (12” to 118”)
Belt advance speed : 0/3 m/min  (0/118 inch/min)
Width belt: 450 mm  (18”)
Water consumption: 80/90 lt/min   (21 / 24 gal/min)
Air consumption : 70 lt/min    (18.5 gal/min)
Installed power : 30 KW


OVERALL DIMENSIONS

Length(without rollers ): 3900 mm   (154”)
Width: 1450 mm       (57”)
Height: 2050 mm      (81”)
Overall weight: 3500 Kg   (7716 lbs.)


Tecno Edge Polishers